show controllers mgmtmultilink
To display information about the state and the number of bundles of a multilink controller, use the
show
controller mgmtmultilink
command in EXEC mode.
show controllers mgmtmultilink interface-path-id
[
all| brief| internal-state| tabular
]
Syntax Description
Virtual interface.
Use the
show interfaces
command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (
?
)
online help function.
interface-path-id
Displays all multilink management information.
all
Displays brief multilink management information.
brief
Displays internal multilink management state.
internal-state
Displays multilink management information in tabular format.
tabular
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Modification
Release
This command was introduced.
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
For the
interface-path-id
argument, use the following guidelines:
•
If specifying a physical interface, the naming notation is
rack
/
slot
/
module
/
instance
. The slash between
values is required as part of the notation. An explanation of each component of the naming notation is
as follows:
◦
rack
: Chassis number of the rack.
◦
slot
: Physical slot number of the line card.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
687
Multilink Commands on the Cisco ASR 9000 Series Router
show controllers mgmtmultilink
