channel local
To assign local SONET physical ports as SONET automatic protection switching (APS) channels in the current
APS group, use the
channel local
command in APS group configuration mode. To return to the default setting,
use the
no
form of this command.
channel
{
0| 1
}
local [preconfigure] sonet interface-path-id
no channel
{
0| 1
}
local [preconfigure] sonet interface-path-id
Syntax Description
Assigns a protect or working channel type.
0
is protect,
1
is working.
{
0
|
1
}
(Optional) Specifies a SONET preconfiguration. This keyword is used only when
a modular services or line card is not physically installed in a slot.
preconfigure
Specifies a SONET interface type.
sonet
Physical interface or virtual interface.
Use the
show controllers sonet
command to see a list of all controllers
currently configured on the router.
Note
For more information about the syntax for the router, use the question mark (
?
)
online help function.
interface-path-id
Command Default
A SONET APS local channel is not assigned.
Command Modes
APS group configuration
Command History
Modification
Release
This command was introduced.
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
For the
interface-path-id
argument, use the following guidelines:
•
If specifying a physical interface, the naming notation is
rack
/
slot
/
module
/
port
. The slash between values
is required as part of the notation. An explanation of each component of the naming notation is as follows:
◦
rack
: Chassis number of the rack.
◦
slot
: Physical slot number of the line card.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
849
SONET Controller Commands on the Cisco ASR 9000 Series Router
channel local
