show lldp errors
To display Link Layer Discovery Protocol (LLDP) error and overflow statistics, use the
show lldp errors
command in EXEC configuration mode.
show lldp errors
[
location location
]
Syntax Description
(Optional) Displays information about LLDP neighbors for the specified
location. The
location
argument is entered in the
rack/slot/module
notation.
location location
Command Default
Totals of LLDP error and overflow statistics for the system are displayed.
Command Modes
EXEC (#)
Command History
Modification
Release
This command was introduced.
Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Operation
Task ID
read
ethernet-services
Examples
The following example shows sample output for the
show lldp errors
command:
RP/0/RSP0/CPU0:router#
show lldp errors
Wed Apr 13 06:17:08.321 DST
LLDP errors/overflows:
Total memory allocation failures: 0
Total encapsulation failures: 0
Total input queue overflows: 0
Total table overflows: 0
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
114
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
show lldp errors
