show lldp traffic
To display statistics for Link Layer Discovery Protocol (LLDP) traffic, use the
show lldp traffic
command
in EXEC configuration mode.
show lldp traffic
[
location location
]
Syntax Description
(Optional) Displays LLDP statistics for traffic at the specified location. The
location
argument is entered in the
rack/slot/module
notation.
location location
Command Default
Totals of LLDP statistics for the system are displayed.
Command Modes
EXEC (#)
Command History
Modification
Release
This command was introduced.
Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
To reset the counters displayed by the
show lldp traffic
command, use the
clear lldp counters
command.
Task ID
Operation
Task ID
read
ethernet-services
Examples
The following example shows sample output for statistics for all LLDP traffic on the system:
RP/0/RSP0/CPU0:router#
show lldp traffic
LLDP traffic statistics:
Total frames out: 277
Total entries aged: 0
Total frames in: 328
Total frames received in error: 0
Total frames discarded: 0
Total TLVs discarded: 0
Total TLVs unrecognized: 0
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
121
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
show lldp traffic
