show mac-accounting (Ethernet)
To display MAC accounting statistics for an interface, use the
show mac-accounting
command in EXEC
mode.
show mac-accounting
{
GigabitEthernet| TenGigE
}
interface-path-id
[
location node-id
]
Syntax Description
Indicates the type of Ethernet interface whose MAC accounting statistics
you want to display. Enter
GigabitEthernet
,
TenGigE
, .
{
GigabitEthernet
|
TenGigEHundred
GigEbundle-ether
}
Physical interface or virtual interface.
Use the
show interfaces
command to see a list of all interfaces
currently configured on the router.
Note
For more information about the syntax for the router, use the question mark
(
?
) online help function.
interface-path-id
(Optional) Displays detailed MAC accounting information for the specified
interface on the specified node. The
node-id
argument is entered in the
rack
/
slot
/
module
/
port
notation.
location node-id
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Modification
Release
This command was introduced.
Release 4.1.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
For the
interface-path-id
argument, use these guidelines:
•
If specifying a physical interface, the naming notation is
rack
/
slot
/
module
/
port
. The slash between values
is required as part of the notation. An explanation of each component of the naming notation is as follows:
◦
rack
: Chassis number of the rack.
◦
slot
: Physical slot number of the line card.
◦
module
: Module number. A physical layer interface module (PLIM) is always 0.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
123
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
show mac-accounting (Ethernet)
