show mlacp
To display the MC-LAG information configured locally and for any connected mLACP peer devices, use the
show mlacp
command in the EXEC mode.
show mlacp
[
Bundle-Ether interface-path-id
|
iccp-group group-id
] [
brief| verbose
]
Syntax Description
Displays the information for the ICCP group of the bundle and only the
specified bundle.
Bundle-Ether interface-path-id
Displays information related to the ICCP group.
iccp-group group-id
Displays only the ICCP group information without any bundle
information.
brief
Displays the ICCP group, the bundle and member information.
verbose
Command Default
No default behavior or values
Command Modes
Exec
Command History
Modification
Release
This command was introduced.
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Operations
Task ID
Read
bundle
Examples
These examples display the MC-LAG information:
RP/0/RSP0/CPU0:router#
show mlacp brief
ICCP Group 1
Connect timer:
Off
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
661
Link Bundling Commands on the Cisco ASR 9000 Series Router
show mlacp