show interfaces pos
To display information about a POS interface, use the
show interfaces pos
command in EXEC mode.
show interfaces pos interface-path-id
[
accounting [rates]| brief| description| detail
] [
location node-id
]
Syntax Description
(Optional) Physical interface or virtual interface.
Use the
show interfaces
command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (
?
) online
help function.
interface-path-id
(Optional) Displays accounting information for all POS interfaces on the router, for
a specific POS interface instance, or for all POS interfaces on a specific node.
accounting
(Optional) Displays interface accounting rates for all POS interfaces on the router,
for a specific POS interface instance, or for all POS interfaces on a specific node.
rates
(Optional) Displays brief output for all POS interfaces on the router, for a specific
POS interface instance, or for all POS interfaces on a specific node.
brief
Displays descriptive output for all POS interfaces on the router, for a specific POS
interface instance, or for all POS interfaces on a specific node.
description
(Optional) Displays detailed output for all POS interfaces on the router, for a specific
POS interface instance, or for all POS interfaces on a specific node.
detail
(Optional) Displays detailed POS information for the designated node. The
node-id
argument is entered in the
rack/slot/module
notation.
location node-id
Command Default
Enter the
show interfaces pos
command without including any of the optional keywords or arguments to
display detailed information about all POS interfaces configured on the router.
Command Modes
EXEC
Command History
Modification
Release
This command was introduced.
Release 4.0.0
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
704
Packet-over-SONET Interface Commands on the Cisco ASR 9000 Series Router
show interfaces pos
