background image

8

Program the Remote to Control My Devices 

Your remote is initially programmed to only operate your set-top. The Volume 
and Mute keys will not work until a TV code is programmed into the remote. If the 
remote provides only limited functionality for a device, you can look for a code 
that provides more functionality. Before you begin, make sure you know the brand 
name of the device you want to control. 

Note:

 Some remote keys may be assigned to operate one device type only. For 

example, volume control may be assigned to the TV only. If this is the case, you 
can reprogram power, volume, and channel control using procedures later in 
this guide.

Assigning a Diff erent Device Code to a Mode Key

1.  Find the codes for your brand of device in the appropriate setup code list 

at the end of this guide. For example, look under 

TV Group

 if you need to 

program the remote to operate your TV. 

2.  Turn on your device.

3.  Press and hold

 SELECT 

and the appropriate mode key until all of the mode 

keys blink twice. For example, to set up the TV, press and hold

 SELECT 

and

 

TV. 
Note

If you reassigned mode keys, you may, for example, press 

SELECT 

and

 VCR 

to program the VCR mode key with a TV code. 

4.  Enter the fi rst setup code for the device. All mode keys blink three times to 

indicate that the code entry was accepted.

5.  Point the remote at the device, and press

 POWER, PLAY 

or

 

 

to 

test the device.

6.  Did the device operate correctly?

 • 

If 

yes

, write down the code that worked on the cover of this guide.

  You may need it again if the device code is accidentally erased.

 • 

If 

no

, repeat these steps using a diff erent setup code.

 

 Note: 

If none of the codes listed for your brand of device operate the device 

correctly, go to

 What If None of the Codes Work

 for instructions.

7.  Repeat this procedure for each mode key you want to program.

Summary of Contents for AT8560





























Reviews: