Cisco AT8560, User Manual

13

Change Volume Control

Your remote is originally programmed in one of the following ways: 

•  The remote controls volume for one device, such as your TV, whether the 

remote is in TV, VCR, DVD, or CBL mode. The AUX mode always retains 
separate volume control.

•  The remote controls volume for diff erent devices, depending on the mode 

key you press. For example, in CBL mode, the volume keys control the set-
top. However, in TV mode, the volume keys control the TV.

Try your remote to see how the volume control currently works. The volume 

keys include 

 , 

 and MUTE. If you want to change the volume control, 

complete the procedure that fi ts your needs. 

Controlling Volume for One Device (Program Code 9 9 3)

Note: 

If you want to assign volume control to a Cisco set-top, complete the 

following prerequisite steps. Press 

SETTINGS

 to access the General Settings 

on-screen menu. Then, verify that the Audio: Volume Control setting is set to 

Variable. 

1.  Press and hold 

SELECT 

and

 CBL

 until all mode keys blink twice.

2. Press

 9 9 3

. The CBL key blinks twice.

3.  Press the mode key for the device the volume keys should control. For 

example, if you want to control volume through your TV, press 

TV

. All mode 

keys blink three times.

Notes: 

•  The volume keys control only one device whether you are in CBL, TV, DVD, 

or VCR mode.

•  In AUX mode, the remote always controls volume for the device assigned to 

the AUX key.

Controlling Volume for Diff erent Devices (Program Code 9 9 3) 

1.  Press and hold 

SELECT 

and

 CBL

 until all mode keys blink twice.

2.  Press 

9 9 3

. The CBL key blinks twice.

3.  Press 

SELECT

. All mode keys blink three times.

 Result: 

After you press SELECT, the volume keys control the device 

assigned to that mode. For example, in TV mode, the volume keys control 
volume for the TV only.