Cisco AT8560, User Manual

16

Put It Back the Way I Got It 

Return specifi c advanced functions or all advanced functions back to their 
original settings. Choose the procedure that fi ts your needs.

Important: 

Your service provider may have programmed the dual power control 

feature for your convenience. Therefore, if you reset the power control, you may 
need to program the remote to control the power for the set-top and TV at the 
same time.

Resetting Mode Keys (Program Code 9 9 2)

You can reprogram the VCR key and the AUX key to operate in their original modes.

1.  Press and hold 

CBL 

and

 SELECT 

until all mode keys blink twice.

2. Press

 9 9 2

. The CBL key blinks twice.

3.  Do one of the following: 

•  If you are returning the VCR key to its original state, press 

VCR

 twice.

•  If you are returning the AUX key to its original state, press 

AUX

 twice.

 Result: 

All mode keys blink three times.

4.  Repeat this procedure if you want to return both keys to their original modes. 

Resetting Device Codes and Mode Keys (Program Code 9 7 7)

Follow this procedure to return programmed device codes and mode keys to their 
original settings. This procedure erases device codes you programmed. In addition, 
this procedure returns all reassigned mode keys to their original operation. 

This reset procedure does not reset any changes you made to power, volume, 
or channel control. 

1.  Press and hold 

SELECT 

and

 CBL

 until all mode keys blink twice.

2. Press 

9 7 7

. All mode keys blink three times. Then, after a few seconds the 

CBL key blinks twice. 

Resetting Power, Volume, and Channel Control (Program 
Code 9 8 0)

Follow this procedure to return power, volume, and channel control to their 
original settings. This reset procedure does not reset any device codes you 
programmed or aff ect mode key reassignments.    

1.  Press and hold 

SELECT 

and

 CBL

 until all mode keys blink twice.

2. Press

 9 8 0

. All mode keys blink three times.

Resetting All Changes (Program Code 9 8 1)

Follow this procedure to return the remote completely back to its original settings. 

1.  Press and hold 

SELECT 

and

 CBL

 until all mode keys blink twice.

2. Press 

9 8 1

. All mode keys blink three times. Then, after a few seconds the 

CBL key blinks twice.