9
Advance to page 12.
Remove the sticker that covers the rear panel of your 3G MicroCell.
To ensure success, it is important to complete the steps below in order.
1. Take the
yellow Ethernet cable
that came with the 3G MicroCell and connect one end to the yellow
port labeled
‘Ethernet’
on the 3G MicroCell.
2. Connect the other end of the
yellow Ethernet cable
to any open
Ethernet port on your gateway or Wi-Fi router
.
3. First,
turn off power
to your current internet equipment.
Wait 1 minute
, then
turn on power
to your Internet equipment
in the following order:
a) Gateway or Modem
b) Wi-Fi Router (if you have one)
c) 3G MicroCell (
Do this
last
–
connect one end of the
AC Power Adapter
to the port labeled
‘Power’
on
the 3G MicroCell and connect the other end to an
AC outlet
.)
Option A
High Speed Internet with Gateway or Modem and Wi-Fi Router
Ethernet Cable
(Included)
Gateway or Wi-Fi Router
AT&T 3G MicroCell™
Open Ports
1
3
2
Power
Connect AC power adapter
last
.
Note:
Since you have a gateway or Wi-Fi router, you will NOT need to plug anything into the black port labeled ‘Computer’ on the 3G
MicroCell.
