19
Chapter 5: Configuring the Wireless-B Broadband Router
The Wireless Tab - Wireless Network Access
Wireless-B Broadband Router
The Wireless Tab - Wireless Network Access
Wireless network access can be filtered by using the MAC addresses of the wireless devices transmitting within
your network’s radius.
Wireless Network Access. (See Figure 5-18.) If you select
Allow All
, all computers will be allowed access to the
wireless network. To restrict access to the network, select
Restrict Access
. Click the
Wireless Client MAC
Address
button, and the screen in Figure 5-19 will appear.
Select the
MAC Address
from the list and click the
Select
box, then click the
Select
button.
Click the
Refresh
button if you want to refresh the screen. Click the
Close
button to return to the previous screen.
When finished making your changes on this tab, click the
Save Settings
button to save these changes, or click
the
Cancel Changes
button to undo your changes.
Figure 5-18: Wireless Tab - Wireless Network Access
Figure 5-19: Wireless Tab - Wireless Client MAC List
