6-32
Cisco Broadband Cable Command Reference Guide
OL-1581-07
Chapter 6 Cable CPE Commands
crypto ipsec client ezvpn (global configuration)
Router(config)#
interface c0
Router(config-if)#
crypto ezvpn telecommuter-client
Router(config-if)#
exit
Router(config)#
Note
Specifying the
mode client
option as shown above is optional, because this is default configuration for
these options.
The following example shows the Cisco Easy VPN Remote configuration named
telecommuter-client
being removed from the interface and then deleted:
Router#
config t
Router(config)#
int e1
Router(config-if)#
no crypto ipsec client ezvpn telecommuter-client
Router(config-if)#
exit
Router(config)#
no crypto ipsec client ezvpn telecommuter-client
Router(config)#
Related Commands
Command
Description
clear crypto ipsec
client ezvpn
Resets the Cisco Easy VPN Remote state machine and bring down the
Cisco Easy VPN Remote connection.
crypto ipsec client
ezvpn xauth
Responds to a pending VPN authorization request.
crypto ipsec client
ezvpn (interface
configuration)
(Interface configuration mode) Assigns a Cisco Easy VPN Remote
configuration to an interface.
crypto ipsec client
ezvpn connect
Manually connects to a specified IPSec VPN tunnel.
ip http ezvpn
Enables the Cisco Easy VPN Remote web server interface.