6-33
Cisco Broadband Cable Command Reference Guide
OL-1581-07
Chapter 6 Cable CPE Commands
crypto ipsec client ezvpn (interface configuration)
crypto ipsec client ezvpn (interface configuration)
To assign a Cisco Easy VPN Remote configuration to an interface, specify whether that interface is
outside or inside, and configure multiple outside and inside interfaces, use the
crypto ipsec client ezvpn
command in interface configuration mode. To remove the Cisco Easy VPN Remote configuration from
the interface, use the
no
form of this command.
crypto ipsec client ezvpn
name
[
outside
|
inside
]
no crypto ipsec client ezvpn
name
[
outside
|
inside
]
Note
A separate
crypto ipsec client ezvpn
command exists in global configuration mode that creates a
Cisco Easy VPN Remote configuration.
Syntax Description
Defaults
The default inside interface is the Ethernet interface on Cisco 800 series routers and Cisco uBR905 and
Cisco uBR925 cable access routers.
Command Modes
Interface configuration
Command History
name
Specifies the Cisco Easy VPN Remote configuration to be assigned to the
interface.
outside
(Optional) Specifies the outside interface of the IPSec client router. This is
optional for outside interfaces. You can add up to four outside tunnels, one
tunnel per outside interface, for all platforms.
inside
(Optional) Specifies the inside interface of the IPSec client router. The
Cisco 1700 series has no default inside interface and any inside interface
must be configured. The Cisco 800 series routers, and Cisco uBR905 and
Cisco uBR925 cable access routers have default inside interfaces. However,
you can configure any inside interface. You can add up to three inside
interfaces for all platforms.
Release
Modification
12.2(4)YA
This command was introduced on Cisco 806, Cisco 826, Cisco 827, and
Cisco 828 routers; Cisco 1700 series routers; and Cisco uBR905 and
Cisco uBR925 cable access routers.
12.2(8)YJ, 12.2(15)T
This command was enhanced to enable you to configure multiple outside
and inside interfaces for Cisco 806, Cisco 826, Cisco 827, and Cisco 828
routers; Cisco 1700 series routers; and Cisco uBR905 and Cisco uBR925
cable access routers.