6-39
Cisco Broadband Cable Command Reference Guide
OL-1581-07
Chapter 6 Cable CPE Commands
docsis cvc mfg
Tip
These values are the same that are set using the docsBpi2CodeMfgCodeAccessStart,
docsBpi2CodeMfgCvcAccessStart, and docsBpi2CodeMfgOrgName attributes in the BPI+ MIB
(DOCS-BPI2-MIB).
Examples
The following example shows the default configuration for the
docsis cvc mfg
commands:
Router(config)#
docsis cvc mfg organization "Cisco Systems"
Router(config)#
docsis cvc mfg codeAccessStart 011219000000Z
Router(config)#
docsis cvc mfg cvcAccessStart 011219000000Z
Router(config)#
Note
You must set the organization name using the
docsis cvc mfg organization
command before you can set
either access start time.
Related Commands
Command
Description
docsis cvc mso
Configures the access start times and organization name for the
optional MSO cosigned code verification certificate (CVC).
docsis cvc test
Tests the root CA public key and CM private key that are installed
on the router.