6-82
Cisco Broadband Cable Command Reference Guide
OL-1581-07
Chapter 6 Cable CPE Commands
show controllers cable-modem classifiers
IP classifiers
Tos: 0x8 0xFF 0xF8
Protocol: 258
Source Address: 0.0.0.0
Source Mask: 255.255.255.255
Destination Address: 0.0.0.0
Destination Mask: 255.255.255.255
Source Port Start: 0
Source Port End: 65535
Destination Port Start: 0
Destination Port End: 65535
LLC Classifiers
Destination MAC address: 0:0:0:0:0:0:0:0:0:0:0:0
Source MAC address: 0:0:0:0:0:0
Ether Type: 0x0 0x0 0x0
Router#
The following shows the typical display for the
summary
option:
Router#
show controllers cable-modem 0 classifiers summary
SFID SF Classifier Classifier Rule State
Ref ID Ref priority
675 1 4 10 0 active
676 2 8 11 0 active
1911 3 3 12 0 active
1914 4 7 13 0 active
1912 5 2 14 0 active
1915 6 6 15 0 active
1913 7 1 16 0 active
1916 8 5 17 0 active
Router#
The following shows the detailed information that is displayed for a specific classifier:
Router#
show controllers cable-modem 0 classifiers 4
Upstream Packet Classifiers parameters
Classifier Reference: 10
Classfier ID: 4
Service Flow Reference: 1
Service Flow ID: 675
Rule Priority: 0
Activation State: 1
Dynsrv Change Action: 0
SID: 565
IP classifiers:
ToS: 0x0 0x0 0x0
Protocol: 258
Source Address: 12.0.0.1
Source Mask: 255.255.255.255
Destination Address: 6.0.0.1
Destination Mask: 255.255.255.255
Source Port Start: 0
Source Port End: 65535
Destination Port Start: 0
Destination Port End: 65535
LLC Classifiers:
Destination MAC address: 0:0:0:0:0:0:0:0:0:0:0:0
Source MAC address: 0:0:0:0:0:0
Ether Type: 0x0 0x0 0x0