6-87
Cisco Broadband Cable Command Reference Guide
OL-1581-07
Chapter 6 Cable CPE Commands
show controllers cable-modem crypto des
show controllers cable-modem crypto des
To display information about the Data Encryption Standard (DES) engine registers, use the
show
controllers cable-modem des
command in privileged EXEC mode.
Cisco uBR904, uBR905, uBR924, uBR925 cable access routers, Cisco CVA122 Cable Voice Adapter
show controllers cable-modem
number
crypto des
Syntax Description
Command Modes
Privileged EXEC
Command History
Examples
The following shows typical output for the
show controllers cable-modem crypto des
command.
Router#
show controllers cable-modem 0 crypto des
downstream des:
ds_des_key_table:
key 0: even 0, odd 0
key 1: even 0, odd 0
key 2: even 0, odd 0
key 3: even 0, odd 0
ds_des_cbc_iv_table:
iv 0: even 0, odd 0
iv 1: even 0, odd 0
iv 2: even 0, odd 0
iv 3: even 0, odd 0
ds_des_sid_table:
sid_1=0x0000, sid_2=0x0000, sid_3=0x0000, sid_4=0x0000
ds_des_sid_enable=0x80, ds_des_ctrl=0x2E
ds_des_sv=0x0F00
ds_unencrypted_length=0x0C
upstream des:
us_des_key_table:
key 0: even 0, odd 0
key 1: even 0, odd 0
key 2: even 0, odd 0
key 3: even 0, odd 0
us_des_cbc_iv_table:
iv 0: even 0, odd 0
number
Identifies the cable interface (always
0
).
Release
Modification
11.3(4)NA
This command was introduced, as
show controllers cable-modem des
, for
the Cisco uBR904 cable access router.
12.0(4)XI1
Support was added for the Cisco uBR924 cable access router.
12.1(3)XL
Support was added for the Cisco uBR905 cable access router.
12.1(5)XU1
Support was added for the Cisco CVA122 Cable Voice Adapter.
12.2(2)XA
Support was added for the Cisco uBR925 cable access router.
12.2(X)BC
This command was renamed to
show controllers cable-modem crypto des
.