6-108
Cisco Broadband Cable Command Reference Guide
OL-1581-07
Chapter 6 Cable CPE Commands
show controllers cable-modem mac
Auth. Reject Wait Time: 60
COS 1:
Assigned SID: 5
Max Downstream Rate: 4000000
Max Upstream Rate: 2000000
Upstream Priority: 7
Min Upstream Rate: 100000
Max Upstream Burst: 12
Privacy Enable: TRUE
Ranging Backoff Start: 0 (at initial ranging)
Ranging Backoff End: 4 (at initial ranging)
Data Backoff Start: 0 (at initial ranging)
Data Backoff End: 4 (at initial ranging)
IP Address: 0.0.0.0
Net Mask: 0.0.0.0
TFTP Server IP Address: 223.255.254.254
Time Server IP Address: 188.188.1.5
Config File Name: muck/ebuell/tftp/cm_conf
Time Zone Offset: -28800
Log Server IP Address: 0.0.0.0
Drop Ack Enabled: TRUE
Piggyback when Ccat On: Disabled
Mac Sid Status
Max Sids: 4 Sids In Use: 1
SFid Sid State Type rxtx Parm State Idb
5 2 2 2 F4 7 811C24B0
Router#
Table 6-13
describes the fields shown in the display.
Table 6-13 show controller cable-modem mac state Field Descriptions
Field
Description
MAC State
Current operational state of the MAC layer of the router.
Ranging SID
Service ID used for ranging requests.
Registered
Indicates whether or not the router is currently registered with the CMTS.
Privacy Established
Indicates whether or not keys for baseline privacy have been exchanged
between the router and the CMTS, establishing privacy.
Privacy Version
Indicates whether the router is using BPI or BPI+ baseline privacy.
DOCSIS Operating Mode
Indicates the DOCSIS revision that the router has been provisioned for
(DOCSIS 1.0 or DOCSIS 1.1).
Snmp Operating Mode
Indicates the current SNMP operating mode:
•
Co-existence Mode—SNMPv3 co-existence model
•
NmAccess Mode—SNMPv2 model
Mac Resets
Number of times the router reset or initialized this interface.
Sync lost
Number of times the router lost synchronization with the downstream
channel.
Invalid Maps
Number of times the router received invalid MAP messages.
