2-184
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 2 Cisco CMTS Configuration Commands
cable privacy add-certificate
cable privacy add-certificate
To add a manufacturer or root CA certificate to the list of trusted certificates, use the
cable privacy add-
certificate
command in global configuration mode. To remove a particular certificate, use the
no
form
of this command.
cable privacy add-certificate
{
manufacturer
hex-data
|
root
hex-data
}
no cable privacy add-certificate
{
manufacturer
hex-data
|
root
hex-data
}
Syntax Description
Defaults
No default behavior or values.
Command Modes
Global configuration
Command History
Usage Guidelines
This command is applicable only on images that support BPI or BPI+ encryption.
Examples
The following example adds a manufacturer CA certificate to the CMTS list of trusted certificates:
Router(config)#
cable privacy add-certificate manufacturer
35c146353431a541463b41337343938333373142
FEF03A8BC7A441313134749A0A592C9C66831412
Router(config)#
The following example adds a root CA certificate to the CMTS list of trusted certificates:
Router(config)#
cable privacy add-certificate root 00908300 00300501
308202A1 3082020A A0030201 02020800 90830000 00000130 0D06092A 864886F7
0D010105 05003081 92310B30 09060355 04061302 4A503110 300E0603 55040A13
07546F73 68696261 310F300D 06035504 0B130644 4F435349 53312730 25060355
040B131E 312D312D 31205368 69626175 7261204D 696E6174 6F2D6B75 20546F6B
796F3137 30350603 55040313 2E546F73 68696261 20436162 6C65204D 6F64656D
20526F6F 74204365 72746966 69636174 65204175 74686F72 69747930 1E170D30
manufacturer
hex-data
Specifies the hexadecimal data for the manufacturer CA certificate.
Enter multiple lines as needed, and use a blank line to terminate the
string.
root
hex-data
Specifies the hexadecimal data for the root CA certificate. Enter
multiple lines as needed, and use a blank line to terminate the string.
Release
Modification
12.1(7)CX,
12.2(1)XF1,
12.2(4)BC1
This command was introduced.
12.2(11)BC1 The
accept-self-signed-certificate
option was moved to be part of the
cable
privacy
cable interface command.