2-189
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 2 Cisco CMTS Configuration Commands
cable privacy kek
Note
The
cable privacy kek grace-time
command is primarily intended for lab and testing use, and typically
should not be used for normal operations because it changes the grace time for all CMs on the cable
interface. To change the grace time for a particular cable modem, include the new value as part of the
Baseline Privacy Configuration Settings in the DOCSIS configuration file that is downloaded to the CM.
Examples
The following example shows how to set the KEK privacy grace-time to 800 seconds:
Router(config)#
interface cable c5/1/0
Router(config-if)#
cable privacy kek grace-time 800
Router(config-if)#
The following example shows how to set the KEK privacy life-time to 750,000 seconds:
Router(config)#
interface cable c3/0
Router(config-if)#
cable privacy kek life-time 750000
Router(config-if)#
Related Commands
Command
Description
cable privacy add-
certificate
Configures certificates for BPI+ encryption.
cable privacy
Enables and configures BPI+ encryption on a cable interface.
cable privacy tek
Sets traffic encryption keys and timeout periods.
option
Determines whether a specific CM is online.
privacy
Configures the BPI or BPI+ configuration parameters in a DOCSIS
configuration file.
show cable privacy
Displays information about BPI status and operation.
show interface cable
privacy
Displays the current values of the KEK and TEK timers for an interface.
debug cable privacy
Displays debug messages for BPI operation.