2-298
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 2 Cisco CMTS Configuration Commands
cable upstream data-backoff
Examples
The following example shows how to set the automatic data backoff values for upstream 2 on a cable
interface card:
Router#
configure terminal
Router(config)#
interface cable 3/0
Router(config-if)#
cable upstream 2 data-backoff automatic
Router(config-if)#
Related Commands
Command
Description
cable insertion-interval
Configures the interval between consecutive initial ranging
slots on an upstream.
cable upstream range-
backoff
Specifies automatic or configured initial ranging backoff
calculation.
show controllers cable
Displays the backoff window setting for the configured
upstream port.