2-480
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 2 Cisco CMTS Configuration Commands
snmp-server enable traps docsis-cmts
Command History
Usage Guidelines
This command enables traps that are defined in the
DOCS-CABLE-DEVICE-TRAP-MIB
MIB.
For other SNMP commands that affect the operation of the CMTS, see the
Cisco IOS Configuration
Fundamentals Command Reference Guide
.
Examples
The following example shows how to enable traps for the failure of DOCSIS registration-related events
on the CMTS:
router(config)#
snmp-server enable traps docsis-cmts reqack reqreq regrsp
router(config)#
Related Commands
Release
Modification
12.1(7)CX1,
12.2(4)BC1
This command, along with the
DOCS-CABLE-DEVICE-TRAP-MIB
MIB,
was introduced.
Command
Description
snmp-server enable traps
cable
Enables traps for cable-related events.