3-2
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
Supported Platforms and Cisco IOS Releases
Tip
This section documents only cable-specific
show
commands. For non-cable-specific commands, see the
command reference documentation for
Cisco IOS Release 12.2
, available on
Cisco.com
.
Table 3-1
Cisco Cable CMTS IOS Releases
Cisco IOS Release
Platforms Supported
Description
Cisco IOS Release 12.3(9a)BC
Cisco uBR7100 series routers,
Cisco uBR7200 series routers,
Cisco uBR10012 router
Introduced enhancements for the following commands:
•
show cable tech-support
•
show controllers cable
•
show crypto ca certificates
•
show crypto ca trustpoints
•
show tech-support
Cisco IOS Release 12.2(15)BC1 Cisco uBR7100 series routers,
Cisco uBR7200 series routers,
Cisco uBR10012 router
The 12.2 BC train is the Cisco cable-specific early
deployment release train that provides DOCSIS 1.1 and
other new feature support.
Cisco IOS Release 12.2(11)CY
Cisco uBR10012 router
Release 12.2(11)CY introduces support for the
Cisco uBR-MC5X20S cable interface line card.
Cisco IOS Release 12.2(15)CX
Cisco uBR7246VXR router
Release 12.2(15)CXintroduces support for the
Cisco uBR-MC28U/X cable interface line card.
Cisco IOS 12.1(19)EC
Cisco uBR7100 series routers,
Cisco uBR7200 series routers
The 12.1 EC train is the Cisco cable-specific early
deployment “stable” DOCSIS 1.0 release train.
Cisco IOS Release 12.0(16)SC3
Cisco uBR7200 series routers
The 12.0 SC train was the previous Cisco cable-specific
“stable” release train for Cisco uBR7200 series routers.
This train excludes telco return, DOCSIS 1.0 extensions
support, Cisco UBR7246 VXR clock card feature set,
and the Cisco uBR-MC16S-based hardware and
software support.
Note
The 12.0 SC has reached its end of life with the
12.0(16)SC3 release.