3-21
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
show cable dsg
DSG statistics information
DSG keepalive is set
Vendor: DDD, Tunnel count: 1
Vendor: BBB, Tunnel count: 2
Vendor name is DDD, tunnel MAC is 0001.0002.0003
Group address is 226.2.2.2, source address is *
Interface is Cable5/1, mapping entry is used 1
Received 5968 packets, forwarded 5289 packets
Dropped 679 packets, last second rate 16878 bits/sec
Vendor name is BBB, tunnel MAC is 0009.0010.0011
Group address is 227.2.2.2, source address is *
Interface is Cable3/0, interface Cable3/0 is bundle master
mapping entry is used 2
Received 0 packets, forwarded 0 packets
Dropped 0 packets, last second rate 0 bits/sec
Vendor name is CCC, tunnel MAC is 0005.0006.0007
Group address is 228.3.3.3, source address is *
Interface is Cable5/1, mapping entry is used 2
Received 5970056 packets, forwarded 400333 packets
Dropped 5569723 packets, last second rate 96768 bits/sec
Router#
The following example shows a typical display for the
show cable dsg stats
command for an individual
vendor:
Router#
show cable dsg stats vendor CCC
DSG statistics information
DSG keepalive is set
Vendor: CCC, Tunnel count: 1
Vendor name is CCC, tunnel MAC is 0005.0006.0007
Group address is 228.3.3.3, source address is *
Interface is Cable5/1, mapping entry is used 2
Received 5970056 packets, forwarded 400333 packets
Dropped 5569723 packets, last second rate 96768 bits/sec
Router#
Note
The packet counters for both the
stats
and
tunnel
options for a particular DSG tunnel continue to
increase as long as traffic is received over that tunnel. If the tunnel does not receive any traffic for three
minutes or more, the counters are automatically reset to 0.
The following example shows a typical display for the
show cable dsg stats
command for an individual
vendor when the associated cable interface is shut down. The Received, Forwarded, and Dropped
counters are not displayed when an interface is shut down.
Router(config)#
interface c5/1
Router(config-if)#
shutdown
Router(config-if)#
exit
Router(config)#
exit
Router#
show cable dsg stats vendor CCC
DSG statistics information