3-33
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
show cable host access-group
show cable host access-group
To display the hosts and other customer premises equipment (CPE) devices behind the CMs in the
network, along with their access groups, use the
show cable host access-group
command in privileged
EXEC mode.
show cable host
[
ip-address
|
mac-address
]
access-group
Note
The
show cable host
command is not supported on the Cisco uBR10012 universal broadband router.
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
This command displays information only for hosts and other CPE devices. To display information for
CMs and their associated CPE devices, use the
show cable device access-group
command. To display
information only for CMs, use the
show cable modem access-group
command.
If an SNMP manager is requesting information about CM or CPE devices at the same time that this
command is given, the command displays the following error message:
No information is available, please try later.
Wait until the SNMP retrieval is done and retry the CLI command.
Examples
The following example shows how to display all the hosts behind the CMs in the network:
router#
show cable host access-group
MAC address IP address Type Access-group
0080.c6f9.b42e 24.168.220.52 host
0020.7806.defe 192.168.28.134 host
0050.baa0.5ccd 24.168.223.251 host
0050.046f.f4cf 192.168.33.25 host
0050.bacf.5d89 192.168.37.113 host
0050.1800.a8cb 192.168.33.90 host
0040.d00f.44f0 192.168.34.128 host
0050.e456.9641 192.168.39.66 host
mac-addr
(Optional) Specifies the 48-bit hardware address for a particular CM or host.
ip-addr
(Optional)
Specifies
the IP address for a particular CM or host.
Release
Modification
11.NA
This command was introduced.
12.1(3a)EC1
Support was added to the Release 12.1 EC train.
12.2(4)BC1
Support was added to the Release 12.2 BC train for the Cisco uBR7100
series and Cisco uBR7200 series routers. (This command also appears in
the CLI for the Cisco uBR10012 router but is not functional.)