3-56
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
show cable modem
0010.7bed.9b6d 144.205.151.228 C6/1/1/U2 online(pt) 59 0.25 1554 1 N
0002.fdfa.12db 144.205.151.234 C7/0/0/U0 online 15 -0.75 1914 1 N
0002.fdfa.138d 144.205.151.140 C7/0/0/U5 online 4 0.00 1917 1 N
0003.e38f.e85b 144.205.151.214 C7/0/0/U5 online 17 *0.25 1919 1 N
0003.e38f.f4cb 144.205.151.238 C7/0/0/U5 online(pt) 16 0.00 !2750 1 N
0003.e3a6.7fd9 144.205.151.151 C7/0/0/U5 online 1 0.25 1922 0 N
0020.4005.3f06 144.205.151.145 C7/0/0/U0 online(pt) 2 0.00 1901 1 N
0020.4006.b010 144.205.151.164 C7/0/0/U5 online(pt) 3 0.00 1901 1 N
0050.7302.3d83 144.205.151.240 C7/0/0/U0 online(pt) 18 -0.25 1543 1 N
00b0.6478.ae8d 144.205.151.254 C7/0/0/U5 online(pt) 44 0.25 1920 21 N
00d0.bad3.c0cd 144.205.151.149 C7/0/0/U5 online 19 0.25 1543 1 N
00d0.bad3.c0cf 144.205.151.194 C7/0/0/U0 online 13 0.00 1546 1 N
00d0.bad3.c0d5 144.205.151.133 C7/0/0/U0 online 12 *0.50 1546 1 N
Router#
The following example shows sample output when the cable interface line cards are up, but no cable
modems are yet online:
Router#
show cable modem
MAC Address IP Address I/F MAC Prim RxPwr Timing Num BPI
State Sid (db) Offset CPE Enb
Router#
The following example shows sample output when the Cisco CMTS router contains only Broadband
Processing Engine (BPE) cable interface line cards and none of the cable interface line cards are up:
Router#
show cable modem
Router#
The following example shows sample output for the
verbose
option for a particular CM:
Router#
show cable modem 0010.7bb3.fcd1 verbose
MAC Address : 00C0.7bb3.fcd1
IP Address : 10.20.113.2
Prim Sid : 1
QoS Profile Index : 6
Interface : C5/0/U5
sysDescr : Vendor ABC DOCSIS 2.0 Cable Modem
Upstream Power : 0 dBmV (SNR = 33.25 dBmV)
Downstream Power : 0 dBmV (SNR = ----- dBmV)
Timing Offset : 1624
Initial Timing Offset : 2812
Received Power : 0.25
MAC Version : DOC1.0
Qos Provisioned Mode : DOC1.0
Enable DOCSIS2.0 Mode : Y
Phy Operating Mode : atdma
Capabilities : {Frag=N, Concat=N, PHS=N, Priv=BPI}
Sid/Said Limit : {Max Us Sids=0, Max Ds Saids=0}
Optional Filtering Support : {802.1P=N, 802.1Q=N}
Transmit Equalizer Support : {Taps/Symbol= 0, Num of Taps= 0}
Number of CPE IPs : 0(Max CPEs = 1)
CFG Max-CPE : 1
Flaps : 373(Jun 1 13:11:01)
Errors : 0 CRCs, 0 HCSes
Stn Mtn Failures : 0 aborts, 3 exhausted
Total US Flows : 1(1 active)
Total DS Flows : 1(1 active)
Total US Data : 1452082 packets, 171344434 bytes