3-109
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
show cable modem registered
show cable modem registered
To display a list of the CMs that have registered with the Cisco CMTS, use the
show cable modem
registered
command in privileged EXEC mode.
show cable modem
[
ip-address
|
mac-address
]
registered
show cable modem
cable
slot/port
[
upstream
port
]
registered
show cable modem
cable
slot
/
subslot
/
port
[
upstream
port
]
registered
Syntax Description
Defaults
Displays a list of all registered CMs on the Cisco CMTS router.
Command Modes
Privileged EXEC
Command History
ip-address
(Optional) Displays information for the registered CM with the specified IP
address.
mac-address
(Optional) Displays information for the registered CM with the specified
MAC address.
cable
slot/port
(Optional) Displays information for all registered CMs on the specified
cable interface and downstream port on the Cisco uBR7100 series and
Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is
1/0
. On the
Cisco uBR7200 series router,
slot
can range from 3 to 6, and
port
can be 0
or 1, depending on the cable interface.
cable
slot/subslot/port
(Optional) Displays information for all registered CMs on the specified
cable interface on the Cisco uBR10012 router. The following are the valid
values:
•
slot
= 5 to 8
•
subslot
= 0 or 1
•
port
= 0 to 4 (depending on the cable interface)
upstream
port
(Optional) Displays information for all CMs using this specific upstream.
You can specify this option only when displaying information for a cable
interface. The valid range for
port
begins with 0 and ends with a value that
depends on the number of upstream ports on the cable interface line card.
Release
Modification
11.3 NA
This command was introduced.
12.2(4)BC1
This command was supported on the Cisco uBR10012 router.