2-51
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 2 Cisco CMTS Configuration Commands
cable downstream frequency
Examples
The following example shows how to set the downstream center frequency display value:
router(config)#
interface c6/0
router(config-if)#
cable downstream frequency 96000000
router(config-if)#
Related Commands
Command
Description
cable downstream annex
Sets the MPEG framing format for a downstream port on a cable
interface line card to either Annex A (Europe) or Annex B (North
America).
cable downstream rf-power
Configures the desired RF output power on the integrated
upconverter.
cable downstream rf-
shutdown
Enables or disables the RF output from the integrated upconverter.
show controllers cable
Displays status and configuration information for the cable interface.
On supported cable interfaces, this includes information about the
integrated upconverter.