3-167
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
show controllers cable
show controllers cable
To display information about the interface controllers for a cable interface on the Cisco CMTS router,
use the
show controllers cable
command in user EXEC or privileged EXEC mode.
show controllers cable
{
slot/port
|
slot
/
subslot
/
port
} [
downstream
|
upstream
[
port
] | [
mem-stat
]
[
memory
] [
proc-cpu
] [
tech-support
] ] [
tech-support
]
Syntax Description
Command Modes
User EXEC (all options except
tech-support
), Privileged EXEC
slot/port
Identifies the cable interface and downstream port on the
Cisco uBR7100 series and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is
1/0
. On the
Cisco uBR7200 series router,
slot
can range from 3 to 6, and
port
can
be 0 or 1, depending on the cable interface.
slot/subslot/port
Identifies the cable interface on the Cisco uBR10012 router. The
following are the valid values:
•
slot
= 5 to 8
•
subslot
= 0 or 1
•
port
= 0 to 4 (depending on the cable interface)
downstream
(Optional) Displays downstream interface status.
upstream
(Optional) Displays upstream interface status.
port
(Optional) Specifies the desired upstream port. Valid values start with
0 for the first upstream port on the cable interface line card.
mem-stat
(Optional) Displays the output from the
show memory statistics
command to display a summary of memory statistics for a Broadband
Processing Engine (BPE) cable interface line card.
memory
(Optional) Displays the output from the
show memory
command to
display a summary of memory statistics, including the memory as it is
allocated per process, for a Broadband Processing Engine (BPE) cable
interface line card.
proc-cpu
(Optional) Displays the output from the
show processes cpu
command
to display the processor status for a Broadband Processing Engine
(BPE) cable interface line card.
tech-support
(Optional) Cisco IOS Release 12.3(9a)BC adds the optional
tech-
support
keyword. This change allows users with large numbers of
online cable modems to collect the necessary line card information
without consuming the console session for a long period of time.
tech-support
(Optional, privileged EXEC mode only) Displays the output from the
show tech-support
command for a Broadband Processing Engine
(BPE) cable interface line card.
