3-238
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
show interface cable sid
Router#
show interface cable6/0.1 sid
Command not allowed on sub-interface
Please use main interface C6/0
The following example shows sample output for the
secondary-ip
keyword:
Router#
show interface cable5/0 sid secondary-ip
For sid 1 secondary ip list contains 2 address(es)
195.151.129.20
196.100.81.123
For sid 2 secondary ip list contains 2 address(es)
195.151.129.17
10.10.11.3
Router#
Tip
One possible situation that might occur is if a CM first assigns a secondary IP address to one CPE device,
but later that same IP address is assigned to another CPE device behind a different CM. If this happens,
the IP address will continue to show up as a secondary IP address for the original CM until that CM
renews its public keys. This will not affect network connectivity for either CPE or CM. You can,
however, clear the unneeded secondary IP address from the CMTS database using the
clear cable
secondary-ip
command.
Table 3-59
describes the fields displayed by the
show interface cable sid
command.
Table 3-59 show interface cable sid Field Descriptions
Field
Description
Sid
Service identification number.
Prim Sid
The primary service identifier (SID) assigned to the modem.
Type
Indicates that this SID was created statically at the time of
registration or dynamically by the exchange of dynamic service
messages between the CM and CMTS.
Online State
Offline State
“Online” means that the modem owning this SID is processing
traffic. “Offline” means that the modem owning this SID is not
processing traffic.
Admin Status
“Disable” means that the SID has been turned off. “Enable” is the
normal state.
QoS
Quality of service.
Create time
When the SID was created, number of seconds since the system
booted.
Input octets (In octets)
Number of octets received by using this SID.
Input packets (In packets)
Number of packets received by using this SID.
Output octets (Out octets)
Number of octets sent from this SID.
Output packets (Out packets)
Number of packets sent from this SID.
IP address
IP address of the modem owning this SID.
MAC address
MAC address of the modem owning this SID.
BW requests received
Number of bandwidth requests received by this SID.
Grants issued
Number of bandwidth requests granted by this SID.