3-260
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 3 Cisco CMTS Show Commands
show tech-support
Usage Guidelines
The
show tech-support
command displays a large amount of configuration, run-time status, and other
information about the Cisco CMTS for troubleshooting problems. The output of this command can be
provided to technical support representatives when reporting a problem.
Note
The
show tech-support
includes most of the information shown in the
show cable tech-support
command.
The
show tech-support
command automatically displays the output of a number of different
show
commands. The exact output depends on the platform, configuration, and type of protocols being used.
Typically, the output includes the output from the following commands:
•
show version
•
show running-config
•
show stacks
•
show chassis
•
show pxf microcode
(Cisco uBR10012 only)
•
show pxf cpu statistics
(Cisco uBR10012 only)
•
show pxf cpu subblocks
(Cisco uBR10012 only)
•
show pxf cpu buffer
(Cisco uBR10012 only)
•
show pxf dma
(Cisco uBR10012 only)
•
show pxf cpu cef memory
(Cisco uBR10012 only)
•
show pxf cpu queue
(Cisco uBR10012 only)
•
show pxf cpu statistics drop
(Cisco uBR10012 only)
•
show interfaces
•
show controllers
(for all cable interface)
•
show cable modem
•
show cable flap-list
•
show cable qos profile
•
show cable modulation-profile
•
show cable spectrum-group
•
show cable hop
•
show interface cable sid
(for each cable interface)
•
show interface cable sid connectivity
(for each cable interface)
•
show interface cable downstream
•
show interface cable upstream
•
show interface cable mac-scheduler
•
show interface cable
modem
•
show process memory
•
show process cpu
•
show controllers
(for all non-cable interfaces)
