4-10
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 4 Commands for the Cisco uBR10012 Router
clear facility-alarm
clear facility-alarm
To clear some or all of the facility alarms on the Cisco uBR10012 router, use the
clear facility-alarm
command in privileged EXEC mode.
clear facility-alarm
[
critical
|
major
|
minor
|
source pem
{
0
|
1
}]
Syntax Description
Defaults
If specified without any options, clears all facility alarms.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The
clear facility-alarms
command clears some or all of the facility alarms that have occurred on the
Cisco uBR10012 router. Facility alarms occur when the temperature thresholds that are configured with
the
facility-alarm
command are exceeded. These alarms are displayed by the
show facility-alarm
status
command.
Note
The
clear facility-alarms
command also clears the contacts to an external alarm panel, but does not
affect the alarm indicator LEDs on the PRE module. The alarm LEDs remain lit as long as the alarm
condition continues (as indicated by the
show facility-alarm status
command).
Examples
The following example shows how to clear all facility alarms on the router:
Router#
clear facility-alarm
Clearing all alarms
Router#
The following example shows how to clear all critical facility alarms on the router:
Router#
clear facility-alarm critical
Clearing critical alarms
Router#
The following example shows how to clear all alarms for both PEM modules on the router:
critical
(Optional) Clears all critical alarms.
major
(Optional) Clears all major alarms.
minor
(Optional) Clears all minor alarms.
source pem
{
0
|
1
}
(Optional) Clears all alarms for either the first or second Power Entry
Module (PEM).
Release
Modification
12.2(1)XF1
This command was introduced for the Cisco uBR10012 router.
