4-72
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 4 Commands for the Cisco uBR10012 Router
show pxf cpu
join_spt = 0
null_out = 0
igmp = 69
register = 0
no_fast = 136
ipc_resp = 0
keepalive = 0
min_mtu = 0
icmp_frag = 0
icmp_bad = 0
mpls_ttl = 0
tfib = 0
multicast = 69656
clns_isis = 0
fr_lmi = 0
ppp_cntrl = 0
Router#
Note
As shown in this display, the majority of dropped packets should typically be either local (sent to the
router for routing), encap (encapsulated for another protocol), or multicast (IP multicast traffic).
The following example shows a typical display for the
statistics drop
option, which shows chassis-wide
PXF drop statistics:
Router#
show pxf cpu statistics drop
FP drop statistics
packets bytes
icmp_on_icmp 0 0
ipc_cmd_invalid 0 0
icmp_unrch_interval 294 31164
bad_tag_opcode 0 0
bad_ch_handle 0 0
no_touch_from_rp 0 0
dst_ip_is_mcast 0 0
ib_re_bit 0 0
encap_too_big 0 0
no_tfib_route 0 0
mc_disabled 0 0
mc_rpf_failed 0 0
mc_prune_rate_limit 0 0
mc_null_oif 0 0
bad_drop_code 0 0
cobalt_re[00] 0 0
[01] 0 0
[02] 0 0
[03] 0 0
[04] 0 0
[05] 0 0
[06] 0 0
[07] 0 0
[08] 0 0
[09] 0 0
[10] 0 0
[11] 0 0
[12] 0 0
[13] 0 0
[14] 0 0
[15] 0 0
[16] 0 0
[17] 0 0