4-95
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 4 Commands for the Cisco uBR10012 Router
show redundancy
my state = 13 -ACTIVE
peer state = 8 -STANDBY HOT
Mode = Duplex
Unit = Primary
Unit ID = 0
Redundancy Mode = Hot Standby Redundancy
Maintenance Mode = Disabled
Manual Swact = Enabled
Communications = Up
client count = 5
client_notification_TMR = 30000 milliseconds
RF debug mask = 0x0
Related Commands
Command
Description
associate
Associates two line cards for Automatic Protection Switching (APS)
redundancy protection.
clear redundancy
Clears the counters and history information that are used by the
Redundancy Facility (RF) subsystem.
redundancy
Configures the synchronization of system files between the active and
standby PRE1 modules.
redundancy
force-failover
main-cpu
Forces a manual switchover between the active and standby PRE1 modules.