5-78
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 5 Cisco CMTS Debugging Commands
debug cable tlvs
debug cable tlvs
To display the Type/Length/Value encodings (TLVs) parsed by the DOCSIS 1.1 TLV parser/encoder, use
the
debug cable tlvs
command in privileged EXEC mode. The
no
form of this command disables
debugging output.
debug cable tlvs
no debug cable tlvs
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
This command displays the TLVs for service flow encodings, classifier encodings, and PHS rules. Do
not use this command when you have a large number of active CMs on your network because it could
generate a huge amount of output to the console port.
Examples
The following example shows typical output for the
debug cable tlvs
command:
Router#
debug cable tlvs
CMTS TLV encodings debugging is on
00:02:06: Registration request from 0003.e350.9b8d, SID 3 on Cable3/0/U0
00:02:06: TLV-Block Bytes:
00:02:06: 0x0000: 03 01 01 12 01 10 1D 01 00 16 0F 01 01 01 03 02
00:02:06: 0x0010: 00 04 09 06 03 04 0A 0A 00 02 18 07 01 02 00 01
00:02:06: 0x0020: 06 01 07 18 07 01 02 00 02 06 01 07 18 07 01 02
00:02:06: 0x0030: 00 03 06 01 01 18 07 01 02 00 04 06 01 01 19 07
00:02:06: 0x0040: 01 02 00 09 06 01 07 19 07 01 02 00 0A 06 01 01
00:02:06: 0x0050: 19 07 01 02 00 0B 06 01 01 19 07 01 02 00 0C 06
00:02:06: 0x0060: 01 01 06 10 33 E0 BA 7A DA 81 1B 9B 8E 37 F5 33
00:02:06: 0x0070: 1C 84 E7 4D 07 10 01 0C C8 DB F9 26 B7 D2 DD 0A
00:02:06: 0x0080: 00 58 1E 14 15 FD 0C 04 0A 0A 00 02 08 03 00 03
00:02:06: 0x0090: E3 05 21 02 01 01 03 01 01 04 01 01 05 01 00 06
00:02:06: 0x00A0: 01 01 07 01 00 08 01 04 09 01 00 0A 01 01 0B 01
00:02:06: 0x00B0: 08 01 01 01
00:02:06: Found Network Access TLV
00:02:06: Ntw Access Control : 1
00:02:06: Found Max CPEs TLV
00:02:06: Maximum Number Of CPEs : 16
00:02:06: Found Privacy Enable TLV
00:02:06: Privacy Enable : 0
00:02:06: Found Upstream Packet Classifier TLV
Release
Modification
12.1(4)CX
This command was introduced.
12.2(4)BC1
This command was supported on the Cisco uBR7100 series and
Cisco uBR10012 universal broadband routers.