5-97
Cisco Broadband Cable Command Reference Guide
OL-1581-08
Chapter 5 Cisco CMTS Debugging Commands
debug hccp authentication
debug hccp authentication
To display authentication debug messages for HCCP groups, use the
debug hccp authentication
command in privileged EXEC mode. To disable HCCP authentication debug message output, use the
no
form of this command.
debug hccp authentication
no debug hccp authentication
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
You must use the
debug hccp events
command before the
debug hccp authentication
command will
generate any debug message output.
Examples
The following example shows the additional 1+1 redundancy authentication debug message output
produced when the d
ebug hccp authentication
command has been activated:
Router#
debug hccp events
Router#
debug hccp authentication
Sep 7 09:51:50.151:HCCP 1 0->1:HELLO Learn tran 31708
Sep 7 09:51:50.151:auth md5 keyid 1 digest B77F65ED 1B38ED5C 87A7037B C006DAFB
Related Commands
Release
Modification
12.1(3a)EC
This command was introduced.
12.2(4)XF1,
12.2(4)BC1
Support was added for the N+1 (1:n) RF Switch with the Cisco uBR10012
router.
12.2(11)BC1
Support was added for the N+1 (1:n) RF Switch with the
Cisco uBR7246VXR router.
Command
Description
debug hccp
channel-switch
Displays debug messages related to an RF or channel switch that is being
used for HCCP N+1 (1:n) redundancy.
debug hccp events
Displays debug messages for all HCCP group interaction.
debug hccp inter-db
Displays debug messages for the inter-database events during HCCP
operations.
debug hccp plane
Displays debug messages for HCCP-related messages sent between the
router’s control plane and data backplane.