Step 5
Install four cables (two positive and two negative cables) in the four terminal slots as follows:
a) Unscrew the two nuts in each of the four terminal slots.
b) Attach and crimp each lug to the end of each power cable.
Figure 5: Crimping the Cable Lug
c) Attach each cable lug to the two terminal posts in each slot, fasten with two nuts, and tighten to 40 in-lb
(4.5 N·m).
For all your power connections, if you are using cables with two different colors, use one color
cable for all positive circuits and the other color for all negative circuits.
Note
d) Replace the safety cover on the terminal box and fasten with three screws.
Figure 6: Connecting Cables to the Terminal Slots
Catalyst 6880-X Switch Hardware Installation Guide
8
OL-30827-02
Installing and Removing Power Supplies
Connecting to the Power Source
