© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 21 of 146
Configure BIOS Settings
Before you configure BIOS settings, you should check for new system firmware.
1. To check for new system firmware, go to
http://www.cisco.com/
. Choose Support and search for the Cisco
C880 M4 (Figure 16).
Figure 16.
Checking for New Firmware
2. Before you can set up the correct performance BIOS settings, you need to configure console redirection.
Open a web browser and connect to the IMC web user interface as explained previously.
3. On the homepage, choose System > Console Redirection Setup > IPv4 Console Redirection Setup
(Figure 17).
Figure 17.
Cisco C880 M4 Console Redirection for Keyboard, Video, and Mouse (KVM)
4. Enter an IP address and select Enable for both the Video Redirection and Virtual Media options. Click
Apply at the bottom of the page
