background image

75

Release Notes for Cisco CallManager Release 3.0(10)

78-13493-02

Open Caveats

CSCdt40012

DE 30+ loses D Channel under stress.

Workaround: No workaround exists.

CSCdt40683

Cisco Messaging Interface partition must match route partition when configuring
Cisco Messaging Interface.

Workaround: If you are using partitions and calling search spaces, when configuring
CMI, verify that the same partition applies to both the CMI partition, and the route
pattern assigned to the third-party voicemail system.

Example:

Route Pattern 17050

Partition vm

.....

 VoiceMailDn  17050

 VoiceMailPartition vm

CSCdt44000

Call detail records are intermittently not written locally.

Workaround: No workaround exists.

CSCdt44611

Cisco WebAttendant Line State Server LSS is not correct when TCD starts.

Workaround: Take any phones that have the line state as not present off hook and
put them back on hook.  Any line state change will update the Cisco WebAttendant
directory area.

CSCdt45118

Abnormally high memory usage occurs by SQL server.

Workaround: Turn off the BAT and ART tools; then, restart the Cisco CallManager.

CSCdt45861

Failed SetupTransfer request incorrectly modifies existing calls.

Workaround: The application should not be calling lineSetupTransfer() in this
scenario.

CSCdt48558

A need exists to dynamically add route points for Cisco WebAttendant.
Workaround: No workaround exists.

CSCdt50317

Cisco CallManager 3.0(7) call detail records do not move from subscriber to
publisher.

Workaround: No workaround exists.

Table 8

Open Caveats for Cisco CallManager Release 3.0(10) (continued)

DDTS number

Description

Summary of Contents for CallManager Release 3.0









































































































Reviews: