C H A P T E R
2-1
Cisco 1900 Series Hardware Installation
OL-19084-02
2
Preparing for Router Installation
This chapter describes the site requirements and equipment needed to install your Cisco 1900 series
integrated services router. It includes the following sections:
•
Safety Recommendations, page 2-1
•
General Site Requirements, page 2-3
•
Network Cabling Specifications, page 2-5
•
Console and Auxiliary Port Considerations, page 2-5
•
Preparing to Connect to a Network, page 2-7
•
Inspecting the Router, page 2-10
•
Installation Checklist, page 2-11
•
Site Log, page 2-13
•
Inspecting the Router, page 2-10
•
Required Tools and Equipment for Installation and Maintenance, page 2-13
Note
To see translations of the warnings that appear in this publication, refer to the
Regulatory Compliance
and Safety Information for Cisco 1900 Series Routers
document that accompanies your router.
Safety Recommendations
Follow these guidelines to ensure general safety:
•
Keep the chassis area clear and dust-free during and after installation.
•
If you remove the chassis cover, put it in a safe place.
•
Keep tools and chassis components away from walk areas.
•
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf, and roll up
your sleeves.
•
Wear safety glasses when working under conditions that might be hazardous to your eyes.
•
Do not perform any action that creates a hazard to people or makes the equipment unsafe.
Warning
Read the installation instructions before connecting the system to the power source.
Statement 1004
