Supervisor Card
The Supervisor Card is the route processor of the Cisco cBR and includes integrated backhaul capability. It
is installed in the front of the Cisco cBR chassis. The plastic latch maintains the alignment of the spring-loaded
ejector with the faceplate. The Supervisor Card has a tethered door to allow access to the ports on its faceplate.
Figure 12: Supervisor Card
LEDs
5
Spring-loaded ejector
1
Support rails
6
Tethered I/O door
2
USB ports
7
Plastic latch
3
Console port
8
Removable air filter
4
Table 13: Physical Specifications of the Supervisor Card
Value
Unit
19.98 in (50.7 cm)
Depth
16.27 in (41.3 cm)
Width
2.82 in (7.16 cm)
Height
26 lb (11.8 kg)
Maximum weight
Table 14: Ports on the Supervisor Card
Description
Port
The Supervisor Card has two type-A USB ports. These
ports are used for connecting external memory sticks
or flash drives to load configurations.
USB ports
Cisco Converged Broadband Routers Hardware Installation Guide
21
What is a Cisco cBR Series Converged Broadband Router
Cisco cBR-8 Converged Cable Access Router Supervisor 250G