Cisco cBR Maintaining Manual Download

Page: 7 / 12

•

Position the front power entry bezel on the chassis. Insert and tighten the two screws using a 3/16"
flat-blade torque screwdriver with a torque of 5-7 in-lb (0.56-0.79 Nm) to secure the bezel.

Removing the FPEM from the Cisco cBR Chassis

Before You Begin

•

For an AC-powered Cisco cBR chassis,

remove the AC power connections

For an DC-powered Cisco cBR chassis,

remove the DC power connections

•

Attach an ESD-preventive wrist strap to your wrist and connect the other end to the grounding lug
connected to the chassis.

•

Remove the Power Modules

•

If you are replacing the entire power system,

remove the Power Cassette Module

•

Be aware of the weight and size of the equipment. Handle it with care.

Required Tools and Equipment

•

ESD-preventive wrist strap

•

T10 Torx screwdriver

Cisco Converged Broadband Routers Hardware Installation Guide

Maintaining the Power System in the Cisco cBR Chassis

Removing the FPEM from the Cisco cBR Chassis

Summary of Contents for cBR













Search results

Summary of Contents for cBR

Reviews:

Related manuals for cBR

Brands by name

Popular brands

Cisco cBR, Maintaining Manual

Search results

Summary of Contents for cBR

Reviews:

Related manuals for cBR

Brands by name

Popular brands