2-21
Cisco CGS 2520 Hardware Installation Guide
OL-31444-01
Chapter 2 Switch Installation
Inserting and Removing the SFP Module Patch Cable
Figure 2-18
Removing a Bale Clasp Latch SFP Module
Step 5
Grasp the SFP module, and carefully remove it from the slot.
Step 6
Place the module in an anti-static bag or other protective environment.
Inserting and Removing the SFP Module Patch Cable
Step 1
Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface.
Step 2
Insert the SFP module patch cable into the slot until you feel the connector on the cable snap into place
at the rear of the slot (see
Figure 2-19
).
Figure 2-19
Inserting an SFP Module Patch Cable
Step 3
Repeat these steps for the second switch that you want to connect to the first switch.
