2-8
User Guide for Cisco Digital Media Player Device Manager 1.0
OL-12472-01
Chapter 2 Using DMPDM
Configuring Settings
Adjusting the Placement and Proportions of Content on a DMP Display
You can adjust the proportions, horizontal position, and vertical position of content that you show on a
DMP display.
Step 1
In the Settings list, click
Advanced Video
.
Step 2
Enter or edit the required values, as described in
Table 2-5
.
Step 3
To confirm that you are satisfied with the entries or changes that you made and to record them in volatile
memory, click
Apply
.
After you click Apply, the entries or changes take effect. However, the previously defined values will
return as soon as the next time that your DMP restarts.
Step 4
(
Optional
) To put all changed values into effect permanently, so that they persist even after your DMP
restarts, select
Administration > Save Configuration
and, when the Save Configuration page appears,
click
Save
.
Table 2-4
GUI Elements on the DMM Page
Element
Description
DMM
Timeout (seconds)
The maximum number of seconds that your DMP will wait for a response from the DMM appliance
that you identify in the DMM Host text box.
DMM Host
The IP address or routable DNS name of the one DMM appliance that your DMP trusts.
Table 2-5
GUI Elements on the Advanced Video Page
Element
Description
Advanced Video
X of Destination
Window (Relative
Coordinates)
The absolute center point of your DMP display, as measured from left to right (on the
x
-axis),
in pixels.
•
Reduce the value to move displayed content closer to the left edge.
•
Increase the value to move displayed content closer to the right edge.
Y of Destination
Window (Relative
Coordinates)
The absolute center point of your DMP display, as measured from top to bottom (on the
y
-axis),
in pixels.
•
Reduce the value to move displayed content closer to the top edge.
•
Increase the value to move content closer to the bottom edge.
Width of Destination
Window (Relative
Coordinates)
The total width in pixels of your DMP display. The maximum value is 4096 pixels.
•
Reduce the value to reduce the width of displayed content.
•
Increase the value to increase the width of displayed content.
Height of Destination
Window (Relative
Coordinates)
The total height in pixels of your DMP display. The maximum value is 4096 pixels.
•
Reduce the value to reduce the height of displayed content.
•
Increase the value to increase the height of displayed content.
