Figure 98: Attaching the Front Upper Grille and Logo Bezel
Installing the Lower Grille Screen and Frame Assembly
In this task, you must first remove the lower grille screen from the frame, because the screws that attach the
frame assembly to the chassis are inboard of the screen—that is, the new screen is shipped already installed
into the new frame assembly, but you cannot attach the new frame to the chassis until you remove the screen
first. When the new frame assembly is installed, you can reinstall the lower grille screen into the new frame.
Note
Step 11
Using the screwdriver, loosen the four captive screws, two on each side, that secure the lower grille screen to its frame
assembly; then carefully set the screen aside (see the next figure).
Cisco CRS Routers 16-Slot Line Card Chassis Installation Guide
180
Installing and Removing Exterior Cosmetic Components
Steps