Purpose
Command or Action
end
—
Prompts user to take one of these actions:
•
Yes
—
Saves configuration changes and exits the configuration
session.
•
No
—
Exits the configuration session without committing the
configuration changes.
•
Cancel
—
Remains in the configuration mode, without
committing the configuration changes.
Related Topics
Path Computation Element, on page 185
Configure PCE: Example, on page 351
Configuring a Path Computation Element Address
Perform this task to configure a PCE address.
Only one TE-enabled IGP instance can be used at a time.
Note
SUMMARY STEPS
1.
configure
2.
mpls traffic-eng
3.
pce address ipv4 address
4.
Use the
commit
or
end
command.
DETAILED STEPS
Purpose
Command or Action
Enters global configuration mode.
configure
Example:
RP/0/RP0/CPU0:router# configure
Step 1
Enters the MPLS-TE configuration mode.
mpls traffic-eng
Example:
RP/0/RP0/CPU0:router(config)#
mpls
Step 2
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
282
Implementing MPLS Traffic Engineering
Configuring a Path Computation Client and Element