Purpose
Command or Action
Specifies that label switched paths (LSP) are
dynamically calculated.
path-option preference-priority dynamic
Example:
RP/0/RP0/CPU0:router(config-if-p2mp-dest)#
path-option
Step 6
1 dynamic
Specifies that destination 140.140.140.140 uses the
explicit path identified by the explicit path name "to4."
path-option preference-priority explicit name pathname
Example:
RP/0/RP0/CPU0:router(config-if-p2mp-dest)#
path-option
Step 7
2 explicit name to4
commit
—
Saves the configuration changes and remains
within the configuration session.
Use the
commit
or
end
command.
Step 8
end
—
Prompts user to take one of these actions:
•
Yes
—
Saves configuration changes and exits the
configuration session.
•
No
—
Exits the configuration session without
committing the configuration changes.
•
Cancel
—
Remains in the configuration session,
without committing the configuration changes.
Related Topics
Point-to-Multipoint Traffic-Engineering Overview, on page 193
Disable a Destination: Example, on page 364
Logging Per Destinations for Point-to-Multipoint
Perform this task to log destinations for Point-to-Multipoint (P2MP).
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
316
Implementing MPLS Traffic Engineering
Configuring Point-to-Multipoint TE
