Purpose
Command or Action
Example:
RP/0/RP0/CPU0:router(config-mpls-te-pce)#stateful-client
When the stateful-client configuration is added
to the node, it will close all existing PCEP peer
connections, and add the stateful capabilities
TLV to the OPEN object it exchanges during
the PCEP session establishment.
When the stateful-client configuration is
removed from the node, it will delete all PCE
instantiated tunnels, close all existing PCEP
connections, and no longer add the stateful
capabilities TLV to the OPEN object it
exchanges during the PCEP session
establishment.
Enables stateful client capabilities.
capabilities
{
instantiation
|
update
}
Example:
RP/0/RP0/CPU0:router(config-mpls-te-pce-stateful)#capabilities
instantiation
Step 5
•
instantiation
—
enables stateful instantiate
capability
•
update
—
enables stateful update capability
commit
—
Saves the configuration changes and
remains within the configuration session.
Use the
commit
or
end
command.
Step 6
end
—
Prompts user to take one of these actions:
•
Yes
—
Saves configuration changes and
exits the configuration session.
•
No
—
Exits the configuration session
without committing the configuration
changes.
•
Cancel
—
Remains in the configuration
session, without committing the
configuration changes.
Configuring VRF Redirection
Perform these steps to configure VRF redirection by installing multiple routes in the routing information base
(RIB) per MPLS TE tunnel:
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
332
Implementing MPLS Traffic Engineering
Configuring VRF Redirection
