Redistributing MPLS LDP Routes into BGP
67
Enabling MLDP
69
Enabling MLDP Make-Before-Break
70
Enabling MLDP MoFRR
71
Enabling MLDP Recursive FEC
73
Enabling MLDP Static Multipoint to Multipoint LSP
74
Enabling MLDP Static Point to Multipoint LSP
76
Disabling MLDP
78
Configuration Examples for Implementing MPLS LDP
79
Configuring LDP with Graceful Restart: Example
79
Configuring LDP Discovery: Example
79
Configuring LDP Link: Example
80
Configuring LDP Discovery for Targeted Hellos: Example
80
Configuring Label Advertisement (Outbound Filtering): Example
80
Configuring LDP Neighbors: Example
81
Configuring LDP Forwarding: Example
81
Configuring LDP Nonstop Forwarding with Graceful Restart: Example
82
Configuring Label Acceptance (Inbound Filtering): Example
82
Configuring Local Label Allocation Control: Example
82
Configuring LDP Session Protection: Example
83
Configuring LDP IGP Synchronization
—
OSPF: Example
83
Configuring LDP IGP Synchronization
—
ISIS: Example
83
Configuring LDP Auto-Configuration: Example
84
Configure IP LDP Fast Reroute Loop Free Alternate: Examples
84
Verify IP LDP Fast Reroute Loop Free Alternate: Example
86
MPLS LDP CSC for Multiple VRFs Configuration: Examples
88
Additional References
99
C H A P T E R 3
Implementing MPLS Static Labeling
101
Enable MPLS Encapsulation on an Interface
102
Define a Range for Static MPLS Labels
103
Setup a Static LSP
104
Allocate Static MPLS Label to an IP Prefix and Configure a LSP
105
Allocate Static MPLS Label for a Specific VRF
107
Verify MPLS Static Bindings
108
Cisco IOS XR MPLS Configuration Guide for the Cisco CRS Router, Release 5.1.x
v
Contents