C-13
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Appendix C Command Reference
Commands
Syntax Description
This command has no arguments or keywords.
Usage Guidelines
Use the
set ip
command to reset the system IP address in response to subsequent prompts. For more
information, see
Reconfiguring the Solution Engine IP Address, page 4-18
.
Example
The following command begins the system IP address configuration.
set ip
set password
To set the ACS SE administrator’s password, use the
set password
command. Subsequent prompts take
you through the process.
set password
Syntax Description
This command has no arguments or keywords.
Usage Guidelines
Use the
set password
command to begin resetting the administrator’s password. Subsequent prompts
take you through the process. For more information, see
Resetting the Solution Engine Administrator
Password, page 4-15
.
Example
The following command initiates the password setting procedure:
set password
set time
To set the ACS SE time zone, NTP server, date, or time, use the
set time
command:
set time
Syntax Description
This command has no arguments or keywords.
Usage Guidelines
Use the
set time
command to begin the setting of the timezone, current date, and current time.
Subsequent prompts take you through the process. For more information, see
Setting the System Time
and Date Manually, page 4-20
.
